Description
The Centerforce Dual Friction(R) Clutch Series uses patented technologies for an ultimate pressure plate and disc combination.
This Centerforce(R) Dual Friction(R) Full Kit with flywheel is engineered for off-road enthusiasts who are looking for the ultimate on and off road performance clutch. The Dual Friction clutch set features the patented Centerforce centrifugal weight system and specialized machining processes to provide outstanding holding-capacity and exceptional street characteristics without sacrificing pedal effort. The high inertia billet steel flywheel helps the engine maintain RPM’s in rough terrain.
- High inertia billet steel flywheel;
- Increased holding capacity
- Ball Bearing pressure plate
- Centrifugal weight design
- Upgraded pilot bearing
- Smooth engagement
- Light pedal effort
- No-hassle bolt-in
Application Summary:
| Year | Make/Model |
|---|---|
| 2007-2011 | Jeep Wrangler |
| Attributes | |
| Alignment Tool Included | Yes |
| California Proposition 65 | WARNING: Cancer – www.P65Warnings.ca.gov |
| Clutch Bolt Size | 8mm, 8mm |
| Clutch Bolt Type | Shouldered, Shouldered |
| Clutch Disc Diameter | 10.4, 264.2 |
| Counterweight Assist | Yes |
| Country of Origin (Primary) | US |
| Crankshaft Bolt Hole Quantity | 8, 8 |
| Disc Material | Organic/Carbon composite |
| Disc Type | Segmented face |
| Disc Type Sprung Solid | Sprung |
| Dowel Pin Quantity Cover To Flywheel | 3 |
| Dowel Pins | 3 |
| Emission Code | Legal US |
| Flywheel Crank Flange Register | 1.889, 1.889 |
| GTIN | 00788442030709 |
| Harmonized Tariff Code (Schedule B) | 8708935000 |
| Hazardous Material Code | N |
| Input Shaft Diameter | 1-1/8 |
| Input Spline Quantity | 10 |
| Life Cycle Status Code | Available to Order |
| Made In The USA | Assembled |
| Material | Billet Steel Flywheel / Cast Iron Pressure Plate / Segmented Organic Friction |
| Mounting Hardware Included | Yes |
| NAFTA Preference Criterion Code | B |
| Out of Package Weight | 83.60 |
| Outside Diameter | 12.345 |
| Pilot Bushing Included | Yes |
| Release Bearing Included | Yes |
| Replaceable Friction Surface | N |
| Ring Gear O.D | 12.345 |
| Ring Gear O.D. | 12.345 |
| Ring Gear OD | 12.345 |
| Ring Gear Tooth Count | 146 |
| SDR Required Flag | N |
| Tooth Quantity | 146 |
| Torque Capacity | 563 |
| Warranty Time | 12 |
Reviews
There are no reviews yet.