Description
Centerforce(R) II Clutch Series utilizes our centrifugal weights and patented machining processes for superb holding power and maximum clutch life.
The Centerforce(R) II Clutch Series utilizes a full facing disc with premium friction material and a pressure plate with centrifugal weights (where applicable). Furthermore, static clamp load is increased via our patented machining processes; this combination allows superb holding power and maximum clutch life, making this clutch ideal for selected street/strip, off-road and towing applications. Pressure plate and disc sold separately on some applications. The Torque Figures for Centerforce II Pressure Plates are based and calculated in conjunction with a Centerforce I & II Clutch Disc.
- 8-5/8″ Diameter;
- Ball Bearing Pressure Plate (where Applicable)
- Light Pedal Effort
- High Quality Friction Material
- Increased Holding Capacity
- Smooth Engagement
Application Summary:
| Year | Make/Model |
|---|---|
| 1990-1991 | Honda Prelude |
| Attributes | |
| ASIN | B000VU7TRQ |
| Attribute Data | A |
| California Proposition 65 | WARNING: Cancer – www.P65Warnings.ca.gov |
| Centrifugal Weights | Without Centrifugal Weights |
| Clutch Disc Diameter | 8.625, 220, 220 |
| Counterweight Assist | N, No |
| Country of Origin (Primary) | US |
| Disc Material | Organic |
| Disc Type | Full face |
| Disc Type Sprung Solid | Sprung, Sprung |
| Emission Code | Legal US |
| Flywheel Step | -0.016 |
| Flywheel Step Type | CUP |
| Friction Surface Configuration | CUP |
| GTIN | 00788442020571 |
| Harmonized Tariff Code (Schedule B) | 8708935000 |
| Hazardous Material Code | N |
| Includes | Pressure Plate, Disc, Alignment tool. |
| Input Shaft Diameter | 1 |
| Input Spline Quantity | 24 |
| Life Cycle Status Code | Available Only While Supplies Last |
| Made In The USA | Assembled |
| Material | Cast Iron Pressure Plate / Organic Friction, Cast Iron Pressure Plate / Organic Friction |
| NAFTA Preference Criterion Code | B |
| Outside Diameter of Friction Surface | 220 |
| Outside Diameter of Friction Surface (Metric) | 220 |
| Outside Diameter of Friction Surface (Standard) | 8-5/8 |
| Replaceable Friction Surface | N |
| SDR Required Flag | N |
| SFI 1.1 Approved | N |
| Spline Diameter and Tooth Count | 1″-24 |
| Standard Pack | 1 |
| Torque Capacity | 228, 228 |
| Warranty Time | 12 |
Reviews
There are no reviews yet.