Description
The Centerforce(R) TRIAD XDS (eXtreme Drive System) 8.75 Inch patented multi-disc clutch offers a smaller and lighter system for quick revving vehicles with engine torque levels from 500 to 1200 ft/lbs.
The Centerforce(R) TRIAD XDS 8.75″ triple disc clutch has been developed for vehicles requiring a holding capacity of 500 to 1200 ft/lbs of torque at the crank. The billet pressure plate features our patented centrifugal weight system (where applicable) for superior clamp load over stock and our patented ball bearing actuated pressure plate (where applicable) providing light pedal effort. The solid hub (possible gear noise) disc pack is equipped with Kevlar full facing friction material providing increased holding capacity. TRIAD XDS clutches are equipped with a lightened billet steel flywheel providing low inertia resulting in quicker RPM’s. Due to the aggressive nature of this race inspired clutch, vehicles may experience some floater noise and/or chatter during operation. Components are designed, machined and assembled in the USA. TRIAD XDS clutches are match balanced and ready for installation using the included ARP fasteners.
- 8.750″ Diameter;
- Solid Hub for Light Quick Shifts.
- Patented Multi-Disc Design
- Holds 500 To 1200 Ft/lbs of Trq
- Ball Bearing Design
- Precision Balanced
- Arp Fasteners
- Spec Card Included!
Application Summary:
| Year | Make/Model |
|---|---|
| 1998-2002 | Chevrolet Camaro |
| 2010-2015 | Chevrolet Camaro |
| 1997-2013 | Chevrolet Corvette |
| 1998-2002 | Pontiac Firebird |
| 2004-2006 | Pontiac GTO |
| Attributes | |
| Alignment Tool Included | Yes |
| California Proposition 65 | WARNING: Cancer – www.P65Warnings.ca.gov |
| Clutch Disc Diameter | 8.750, 222.3 |
| Counterweight Assist | Yes, No |
| Country of Origin (Primary) | US |
| Crankshaft Bolt Hole Quantity | 6, 6 |
| Disc Material | Sintered Metallic |
| Disc Type | Full face |
| Disc Type Sprung Solid | Solid |
| Emission Code | Legal US |
| Flywheel Crank Bolt Qty | 6 |
| Flywheel Crank Bolt Size | 11mm, MM11 x 1.50 x 23 |
| Flywheel Crank Flange Register | 2.068, 2.068 |
| Flywheel Deck Height | 2.890, 2.89 |
| GTIN | 00788442031430 |
| Harmonized Tariff Code (Schedule B) | 8708935000 |
| Hazardous Material Code | N |
| Input Shaft Diameter | 1-1/8 |
| Input Spline Quantity | 26 |
| Installed Height | 2.890 |
| Life Cycle Status Code | Available to Order |
| Made In The USA | Assembled |
| Material | Billet Steel Flywheel / Nodular Iron Pressure Plate / Full Face Cerametallic Friction |
| Mounting Hardware Included | Yes |
| NAFTA Preference Criterion Code | B |
| Out of Package Weight | 34.3, 34.30 |
| Outside Diameter | 14.096 |
| Pilot Bushing Included | Yes |
| Replaceable Friction Surface | N |
| Ring Gear O.D | 14.096 |
| Ring Gear O.D. | 14.105 |
| Ring Gear OD | 14.096 |
| Ring Gear Tooth Count | 168 |
| SDR Required Flag | N |
| SFI 1.1 Approved | N |
| Tooth Quantity | 168 |
| Torque Capacity | 1100 |
| Warranty Time | 12 |
Reviews
There are no reviews yet.