Description
The Centerforce(R) DYAD(R) XDS (eXtreme Drive System) 8.75 Inch patented multi-disc clutch offers smooth engagement, light pedal, and high-end holding capacity for engine torque levels from 400 to 800 ft /lbs.
The Centerforce(R) DYAD XDS 8.75″ twin disc clutch has been developed for vehicles requiring a holding capacity of 400 to 800 ft/lbs of torque at the crank. The billet pressure plate features our patented centrifugal weight system (where applicable) for superior clamp load over stock and our patented ball bearing actuated pressure plate (where applicable) providing light pedal effort. The disc pack is equipped with metallic friction material providing increased holding capacity and is available in either sprung or solid hub (possible gear noise) depending on the application. DYAD XDS clutches are equipped with a lightened billet steel flywheel providing low inertia resulting in quicker RPM’s. Due to the aggressive nature of this race inspired clutch, vehicles may experience some floater noise and/or chatter during operation. Components are designed, machined and assembled in the USA. DYAD XDS clutches are match balanced and ready for installation using the included ARP fasteners.
- 8.75″ Diameter;
- Patented Multi-disc Design
- Race Proven Paddle Style Discs
- Positive Drive Floater
- Holds 400 To 800 Ft/lbs Of Torque
- Precision Balanced
- Arp Fasteners
- Specification Card Included!
Application Summary:
| Year | Make/Model |
|---|---|
| 1998-2002 | Chevrolet Camaro |
| 1998-2002 | Pontiac Firebird |
| 2004 | Pontiac GTO |
| Attributes | |
| Alignment Tool Included | Yes |
| California Proposition 65 | WARNING: Cancer – www.P65Warnings.ca.gov |
| Clutch Disc Diameter | 8.75, 222.3 |
| Counterweight Assist | Yes, No |
| Country of Origin (Primary) | US |
| Crankshaft Bolt Hole Quantity | 6, 6 |
| Disc Material | Sintered Metallic |
| Disc Type | Full face |
| Disc Type Sprung Solid | Sprung, Sprung |
| Emission Code | Legal US |
| Flywheel Crank Bolt Size | 11mm, MM11 x 1.50 x 23 |
| Flywheel Crank Flange Register | 2.068, 2.068 |
| Flywheel Deck Height | 2.375, 2.375 |
| GTIN | 00788442032505 |
| Harmonized Tariff Code (Schedule B) | 8708935000 |
| Hazardous Material Code | N |
| Input Shaft Diameter | 1-1/8 |
| Input Spline Quantity | 26 |
| Installed Height | 2.375 |
| Life Cycle Status Code | Available to Order |
| Made In The USA | Assembled |
| Material | Billet Steel Flywheel / Nodular Iron Pressure Plate / Full Face Cerametallic Friction |
| Mounting Hardware Included | Yes |
| NAFTA Preference Criterion Code | B |
| Outside Diameter | 14.096 |
| Pilot Bushing Included | Yes |
| Ring Gear O.D | 14.096 |
| Ring Gear O.D. | 14.105 |
| Ring Gear OD | 14.096 |
| Ring Gear Tooth Count | 168 |
| SDR Required Flag | N |
| Tooth Quantity | 168 |
| Torque Capacity | 750 |
| Warranty Time | 12 |
Reviews
There are no reviews yet.